multiGuard® Light

Remote control and monitoring

multiGuard® Light is an integrated GSM tranceiver for remote control and monitoring tasks. Simply install a SIM-card and multiGuard® Light is ready.

multiGuard® Light receives alarm signals and data through 10 inputs (8 digital/2 analog) and forwards them through the 900/1800 MHz phone net as SMS, analog voice call or DTMF.

Alarm signals and data can be received on a mobile phone, a PC or directed to a security service.

By means of a SMS or a phone call to multiGuard® Light it is possible to activate or deactivate external relays remotely through 8 relay-outputs, e.g. a siren, a pump or a camera.

multiGuard® Light can be programmed by SMS from a mobile phone or from a PC with multiGuard programming software.

More applications - one solution

Monitoring:

• Buildings/construction sites: protection from break-in and vandalism by means of detectors placed at central spots.
• Maschinery: alarm in case of error states, power failure and safety override.
• Pumps/electric equipment: alarm as acknowledgement for start/stop.
• Boats/containers/trailers/caravans: alarm in case of leakages or temperature deviations.

Remote control:

• Summer residence: turn on/turn off the heat. Read the consumption of water, heat and electricity.
• Farms/gardens: e.g. activate/deactivate irrigation systems.

Specifications

• Dimensions: 157x86x57 mm, 250 g
• DIN-rail, 9 modules
• Power supply: 230 VAC or 12-24 V AC/DC
  Rechargeable 9 V battery possible
• 8 digital inputs (possible to use input 1 as pulse counter)
  Alarm on NC, NO or 24 VDC
• 2 analog inputs (0-10 VDC, 0-20 mA, PT 100)
• 4 relay-outputs (max. capacity: 1500 VA)
• Call list: alarm to max. 25 receivers
• Sabotage: alarm when opening the unit
• Power failure: alarm will be sent if a battery is installed
• Programming: via RS232, from PC via USB converter, by SMS from a mobile phone
• Antenna: built-in. External antenna possible
• Temperature: -20ºC to 55º