multiGuard

multiGuard is produced in the following models:

Data sheet:

Functions in SW:

* 25 phone numbers
* 8 alarm zones (areas)
* 10 macros (alias for multiple commands)
* Enable output on alarm (10 sec. - 15 min. / infinite / follow input)
* Command execution on alarm
* Time controlled ON / OFF
* Time controlled activation of output 2
* Status Message (15 min. - 1 x per week.)
* Approved numbers only (contol and set-up)
* Filter on inputs (10 sec. - 30 min.)
* Delay in alarm (30 sec.)
* Change alarming order with SMS
* Modem to PLC via RS232
* SIA IP for secu centers
* Alarm log 256 events
* Analog log: 2 x per hour, 23.000 measurements

multiGuard is a complete GSM transmitter and receiver unit for controlling and monitoring. Use just a normal SIM card and the unit is ready. Download PDF Presentation

multiGuard can receive alarms (make / break) at the inputs and measurements (0-10V/4-20mA/PT100/temperature) on the analog. Messages sent via SMS to voice calls or DTMF example. to a security center. The alarm can be sent to 25 recipients on a list. The order can be changed with just one SMS.

By using SMS or DTMF caller can activate relays, (sirens, pumps, electric radiators), activate the macros or send IR codes (heat pumps)

multiGuard is programmed by using SMS or the included PC application and RS232 port or GPRS. All commands to the device can be protected by the PIN code or sent from approved numbers, only

By phone or DTMF call multiGuard rings three times if 'no answer'. You can acknowledge the alarm by pressing '#' and further alarming is stopped.

Many applications - one solution

Surveillance:

* Buildings / construction sites: surveillance against theft, burglary and vandalism by using detectors placed at key entrances. In the event of unauthorized access triggered the alarm.

* Equipment: alarm in case of error, malfunction, excess security.

* Pumps / electric equipment: alarm by flooding, pump starts / stops.

* Boats / containers / trailers / caravans: alarm, leakage, or temperature.

* PC: send alarm when the USB plug off.

* Power failure: send alarm if backup battery is installed

Control:

* Heat pumps: acts as SMS-driven remote control for all popular brands

* Cottages: turn on / turn off the heat. Read the consumption of water, heat and electricity.

* Farms / gardens: eg. activate / deactivate irrigation.

* Waterworks: turn off the pumps in case of burglary.

* Burglar alarm: connection to the PIR motion sensor

Connection via GPRS and internet:

Apply the following information:
1. Own number (SIM-card phone no.)
2. USERNAME by own choice
3. APN (Access Point Name supplied by phone operator)
 

• Set-up from PC-SW using internet
   
• Supervision and control via login to Proforts serverl
   
• Download of analog measurements using PC-SW Basic