multiGuard® remote

GSM-alarm and control. 1 out, 2 IR out, 1 alarm, 1 analog.
           temp. probe, 3.6V battery and 12V power supply included

multiGuard® remote is a complete GSM tranceiver with 1 inputs for alarm transmission from wired sensors, 1 analog input from temperature probe, 1 output for controlling e.g. electrical heating and 2 transmitters for infrared control of e.g. heat pumps.

The unit can be programmed with up to 10 IR-codes via an IR remote control and the built-in IR-receiver and the 'learn' function. IR-codes are activated by a SMS or DTMF. 

Alarms can be sent as SMS / DTMF to 25 telephone numbers. It is possible to activate the output-relay with SMS or via DTMF. Alarm is sent in case of power failure. .

Programming of multiGuard® remote is done by SMS or via the enclosed PC SW connected either via USB --> RS232 or GPRS and internet.

Specifications

• Wall mounted box.
• 12V DC included.
• Output relay max.: 230V, 6A
• 1 input: make/break. 1 analog: 0-10V, 0-20mA, PT100, temp. probes.
• Call list: forward alarms to max. 25 mobile numbers.
• Programming: via SMS or PC via USB --> RS232 / GPRS and internet.
• Antenna: built-in. External antenna possible.
• Temperature: -10°C to +55°C.